Humidity

The Humidity component handles the monitoring of device's humidity sensors. Humidity components are identified with humidity:<id> in objects containing multiple component payloads.

The Humidity component uses Humidity as RPC namespace and implements the minimal component interface:

• Humidity.GetConfig to obtain the component's configuration
• Humidity.SetConfig to update the component's configuration
• Humidity.GetStatus to obtain the component's status

Methods

Humidity.SetConfig

Property	Type	Description
id	number	Id of the Humidity component instance
config	object	Configuration that the method takes

Find more about the config properties in config section

Humidity.GetConfig

Property	Type	Description
id	number	Id of the Humidity component instance

Find the Humidity.GetConfig response properties in config section

Humidity.GetStatus

Property	Type	Description
id	number	Id of the Humidity component instance

Find more about the status response properties in status section

Configuration

The configuration of the Humidity component allows to adjust the humidity report threshold value. To Get/Set the configuration of the Humidity component its id must be specified.

Properties:

Property	Type	Description
id	number	Id of the Humidity component instance
name	string or null	Name of the Humidity instance. name length should not exceed 64 chars
report_thr	number	Humidity report threshold in %. Accepted range is device-specific, default [1.0..20.0]% unless specified otherwise
offset	number	Humidity offset in %. Value is applied to measured humidity. Accepted range is device-specific, default [-50.0..50.0]% unless specified otherwise

Status

The status of the Humidity component represents the measurement of the associated humidity sensor. To obtain the status of the Humidity component its id must be specified.

Properties:

Property	Type	Description
id	number	Id of the Humidity component instance
rh	number or null	Relative humidity in % (null if valid value could not be obtained)
errors	array of type string	Shown only if at least one error is present. May contain out_of_range, read when there is problem reading sensor

Webhook Events

There are two events related to the Humidity component that can trigger webhooks:

• humidity.change - produced when humidity delta between two measurements is greater than report_thr
• humidity.measurement - produced on a monotonic measurement period (60s)

humidity.change and humidity.measurement support one attribute, that can be used to compose conditional webhooks:

Property	Type	Description
rh	number	New humidity in %

Examples

Humidity.SetConfig example

Humidity.SetConfig HTTP GET Request

http://192.168.33.1/rpc/Humidity.SetConfig?id=0&config={"name":"Humidity0"}

Humidity.SetConfig Curl Request

curl -X POST -d '{"id":1,"method":"Humidity.SetConfig","params":{"id":0,"config":{"name":"Humidity0"}}}' http://${SHELLY}/rpc

Humidity.SetConfig Mos Request

mos --port ${PORT} call Humidity.SetConfig '{"id":0,"config":{"name":"Humidity0"}}'

Response

Humidity.GetStatus HTTP GET Response

{
  "restart_required": false
}

Humidity.GetStatus Curl Response

{
  "id": 1,
  "src": "shellyplusht-441793cc9d30",
  "params": {
    "restart_required": false
  }
}

Humidity.GetStatus Mos Response

{
  "restart_required": false
}

Humidity.GetConfig example

Humidity.GetConfig HTTP GET Request

http://192.168.33.1/rpc/Humidity.GetConfig?id=0

Humidity.GetConfig Curl Request

curl -X POST -d '{"id":1,"method":"Humidity.GetConfig","params":{"id":0}}' http://${SHELLY}/rpc

Humidity.GetConfig Mos Request

mos --port ${PORT} call Humidity.GetConfig '{"id":0}'

Response

Humidity.GetConfig HTTP GET Response

{
  "id": 0,
  "name": null,
  "report_thr": 5,
  "offset": 0
}

Humidity.GetConfig Curl Response

{
  "id": 1,
  "src": "shellyplusht-441793cc9d30",
  "params": {
    "id": 0,
    "name": null,
    "report_thr": 5,
    "offset": 0
  }
}

Humidity.GetConfig Mos Response

{
  "id": 0,
  "name": null,
  "report_thr": 5,
  "offset": 0
}

Humidity.GetStatus example

Humidity.GetStatus HTTP GET Request

http://192.168.33.1/rpc/Humidity.GetStatus?id=0

Humidity.GetStatus Curl Request

curl -X POST -d '{"id":1,"method":"Humidity.GetStatus","params":{"id":0}}' http://${SHELLY}/rpc

Humidity.GetStatus Mos Request

mos --port ${PORT} call Humidity.GetStatus '{"id":0}'

Response

Humidity.GetStatus HTTP GET Response

{
  "id": 0,
  "rh": 73.7
}

Humidity.GetStatus Curl Response

{
  "id": 1,
  "src": "shellyplusht-441793cc9d30",
  "params": {
    "id": 0,
    "rh": 73.7
  }
}

Humidity.GetStatus Mos Response

{
  "id": 0,
  "rh": 73.7
}